How to Find the Right Plumber School near San Antonio Texas

The initial step to becoming a plumbing tradesman or contractor is locating a plumbing trade school near San Antonio TX. But with numerous technical schools to pick from, just how do you go about making sure that you enroll in the best one? Especially because there are so many points to examine. For instance, many prospective students will start by searching for schools that are nearby their home. Once they have found a few that are within driving range, they will pick the one with the least expensive tuition. Even though location and cost are important, they are not the only factors that must be evaluated. Also important are the reputations of the schools, their accreditation, as well as their graduation and job placement rates. These and additional qualifiers should contribute toward your ultimate judgment when selecting a plumbing training school. We will cover that checklist in more detail later in this article. But to begin with, let's talk a little bit about becoming a plumber and the educational choices that are available.

What is a Plumber?

Almost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local San Antonio TX plumber will typically advance through three phases during their professional career.

• Apprentice. The majority of San Antonio TX plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
• Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
• Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in San Antonio TX is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Options

There are several educational options available near San Antonio TX to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumber Tech Schools

Once you have decided to obtain a certificate, diploma or degree, you can start to narrow down your school options. Because there are so many plumbing trade and vocational schools in the San Antonio TX region, it's important to have a checklist of criteria that each school must meet. The first 2 that we mentioned were location and the cost of tuition. And although both qualifiers may be crucial when making your determination, there are additional variables that must be considered also. Following is a checklist of those added qualifications that you will need to analyze before enrolling in a plumber tech school.

Is the Plumbing School Accredited?  Many plumbing vocational programs have acquired either a regional or a national accreditation. They can earn Institutional Accreditation, which involves the school's programs as a whole, or Programmatic Accreditation, which relates to a specific program, such as electrical technology. Verify that the San Antonio TX program is accredited by a U.S. Department of Education acknowledged accrediting agency, for instance the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you obtain a quality education, it can help in obtaining financial assistance or student loans, which are often not available for non-accredited schools. Additionally, a number of states mandate that the plumbing training course be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  Along with accreditation, an additional way of confirming that a trade school you’re considering is reputable is by checking that it’s properly licensed.  Licensing is usually regulated and controlled by state agencies, such as the Texas Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of San Antonio TX schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the program. A lower completion rate might indicate that students were unhappy with the course and dropped out. It could also suggest that the instructors were not competent to instruct the students. It's similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a broader directory of alumni, which may result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but also that it has the network of contacts to help graduates obtain apprenticeships or employment in the San Antonio TX area.

Are Apprenticeship Programs Sponsored?  Most plumber training programs are taught together with an internship or an apprenticeship program. Those participating vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing contractors or trade unions. Ask if the schools you are reviewing have referring relationships with local San Antonio TX plumbers or plumbing companies. An apprenticeship not only offers a rewarding experience by supplying practical training, but it also furnishes job opportunities and helps to build relationships in the area plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the tools that you will be trained on are up-to-date and what you will be using in the field. If you are currently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be looking for. If not, ask a local San Antonio TX plumbing contractor if they can give you some pointers.

Where is the School Located?  Unless you can relocate, the school must be within commuting distance of your San Antonio TX home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It's important that you receive as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor a couple of the classes so that you can see how big they are and experience the interaction between students and instructors. Speak to some of the students and get their feedback regarding class sizes and instruction. Last, speak to some of the instructors and learn what their level of experience is in San Antonio TX and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the programs you are evaluating are flexible enough to handle your needs. If you can only attend classes at night or on weekends near San Antonio TX, verify that the programs you are reviewing offer those choices. If you can only attend on a part-time basis, be sure that the school you select offers part-time enrollment. Also, find out what the protocol is to make-up classes should you miss any because of work, sickness or family responsibilities.

Learn More About San Antonio Plumbing Training Schools

Pick the Right San Antonio Plumber Vocational School

Picking the right plumber trade school will probably be the most important decision you will make to start your new profession. As we have discussed in this article, there are a number of things that you will need to examine and compare among the schools you are looking at. It's a necessity that any plumber training program that you are considering includes a good deal of hands-on training. Classes need to be smaller in size and every student should have their personal equipment to train with. Classroom education needs to offer a real-world context, and the curriculum should be up-to-date and conform with industry standards. Courses vary in duration and the kind of credential provided, so you will need to determine what length of program and degree or certificate will best serve your needs. Every program offers different options for certification as well. Perhaps The ideal way to research your short list of schools is to check out each campus and speak with the faculty and students. Invest some time to sit in on a few classes. Inspect the campus and facilities. Make certain that you are confident that the program you decide on is the right one for you. With the right training, hard work and dedication, you can become a professional plumber in San Antonio TX.